Tree Species Mapping

What counts as a compartment in forest management planning

A ground-level view into a dense birch and pine forest stand with tall, straight trunks.

Ask three foresters to define a compartment and you'll get three answers that agree on the concept and disagree on the edge cases. That's because "compartment" is an administrative term before it's an ecological one. It's the basic unit a management plan is organized around, the thing a felling license references, the number a harvesting contractor gets briefed against. What makes something count as one compartment rather than two is mostly about permanence, not what's growing inside it.

A compartment is a mapped subdivision of a forest holding, usually somewhere between a couple of hectares and fifty-plus, depending on the estate and the convention the plan was drawn under. The boundaries are meant to last across rotations, which is the part people miss. A compartment line gets set once, against features that don't move: a forest road, a stream, a fence line, an ownership boundary, sometimes a ridge or contour on steep ground. It stays in place through thinning, felling, and regeneration, even when the stand inside looks nothing like it did at the last inventory. Species change inside a compartment all the time. The compartment itself doesn't.

Compartment boundaries, in practice

If you're laying out compartment lines on a new plan, or trying to work out why an old one sits where it does, the rule of thumb is simple: draw on permanent features that are visible on the ground. Current vegetation has no bearing on where the line falls. Roads and rides are the most common boundary. Watercourses come next, partly for access reasons and partly because riparian zones often carry different management rules anyway. Ownership and tenure lines are non-negotiable boundaries regardless of what's growing across them. Fences, old estate walls, and sometimes legacy cadastral lines from whoever drew the first plan decades ago all show up too.

What you don't usually see is a compartment boundary drawn purely because the species mix changes. A block that's half Scots pine and half oak along a gentle slope, with no road or stream between them, is very often still one compartment. That's exactly the situation sub-compartments exist to handle.

Sub-compartment vs compartment

A sub-compartment is a subdivision inside a compartment, used when the stand inside isn't uniform enough to manage as one block. It's the difference between compartment 14 as a whole and 14a, 14b, 14c as distinct parcels within it, usually because of an age-class split, a species change, a patch of windthrow that got salvaged and replanted while the rest stood, or a felling coupe that only took part of the compartment.

The practical distinction: a compartment is the fixed administrative container. A sub-compartment reflects the current state of the stand inside it, and it's expected to change over time as thinning, felling, and regeneration reshape what's there. A compartment boundary surviving fifty years unchanged is normal. A sub-compartment line from the same plan has probably moved two or three times since, as the forest has been worked.

Why the distinction actually matters

Felling licenses, grant applications, and habitat reporting all key off compartment and sub-compartment numbers. Get the boundary wrong, or more commonly get the species composition inside it wrong, and the paperwork downstream follows suit: a mismatched harvest mix in the plan, the wrong restock species ordered, bad numbers in a biodiversity return. The compartment line itself is rarely the problem. What's inside it is.

That's the harder question in practice. Compartment boundaries are stable and well documented. What's standing within them, species by species, right down to the corners and the sub-compartment splits, is usually estimated from a handful of sample plots and extrapolated across the whole block. On a mixed compartment with two or three sub-compartments, a plot or two per sub-compartment is a thin basis for a planting order or a harvest mix decision.

Tree Species Mapping was built around exactly this unit. It delivers a compartment-by-compartment species layer built from narrow-band reflectance and seasonal phenology, so the species breakdown you're working from matches the boundaries already on your plan rather than a sample-plot average stretched across them. If your compartment maps are solid but the species data inside them is the weak link, that's worth a look.

Start a project

← Back to the blog